Part Number Helper

NOTE: While all combinations can be selected, some combinations do not exist. Tool Will improve with time. Last updated 9/9/2026

SMALLER NOTE: The system will not stop any combinations but may throw error alerts up. Further testing required.

Information Will Update Here

Select Here 1/4" 5/16" 3/8" 7/16" 1/2" 9/16" 5/8" 3/4" 7/8" 1" 1-1/8" 1-1/4" 1-3/8" 1-1/2" 1-5/8" 1-3/4" 1-7/8" 2" Diameter

Select Here None Fine Thread Course Thread (LESS THAN 1") Universal Thread (1" AND UP) Thread Pitch

Select Here None 1/4" 1/2" 3/4" 1" 1-1/4" 1-1/2" 1-3/4" 2" 2-1/4" 2-1/2" 2-3/4" 3" 3-1/4" 3-1/2" 3-3/4" 4" 4-1/4" 4-1/2" 4-3/4" 5" 5-1/4" 5-1/2" 5-3/4" 6" 6-1/4" 6-1/2" 6-3/4" 7" 7-1/4" 7-1/2" 7-3/4" 8" 8-1/4" 8-1/2" 8-3/4" 9" 9-1/4" 9-1/2" 9-3/4" 10" Length

Select Here None BOLTS Hex Cap Screw (Bolt) Square Head Cap Screw (Square Bolt) ANCHORS Wedge Anchor B7 STUDS All Thread B7 Stud TAP ENDS Double End Stud (tap End) U BOLTS Universal U-Bolt Long Tangent U-Bolt SCREWS Machine Screw Socket Head Cap Screw Socket Head Set Screw Pan Phillips Head Self Tapping Screw Torx Floorboard Screw KEYSTOCK Square Keystock WASHERS USS Flat Washer SAE Flat Washer Fender Washer Lock Washer NUTS Nylon Lock Nut Nut Finish Hex Stover Lock Nut Slotted Nut Square Nut RODS B7 All Thread Rod Round All Thread Rod Type

Select Here None Black Oxide ZINC COATED Grade 8 Yellow Zinc Grade 5 Zinc Grade 2 Zinc YELLOW CAD COATED CAD CAD With Nuts TEFLON COATED Teflon Teflon With Nuts B7 BLACK Black Black With Nuts NEOPRENE UBOLTS Neoprene Coated GALVANIZED Grade 2 Galvanized STAINLESS 304 Stainless 304 Stainless With Nuts 316 Stainless 316 Stainless With Nuts Modifier


Run Tool

Reid Turnbull 2026